Unigen USB 3.0

USB Flash Drive USB 3.0

FEATURES

General

► Compliance:

    ▷ Compliant to USB 3.1 Gen1

    ▷ USB mass storage device class (MSC)

    ▷ USB human interface device class (HID) support is possible

    ▷ 4 configurable endpoints

    ▷ Supporting Full-Speed, Hi-Speed and SuperSpeed 5Gbps transmissions

    ▷ Bulk, isochronous, and interrupt transfer modes

    ▷ USB Attached SCSI (UASP) support

    ▷ S.M.A.R.T. Sanitize, and Secure Erase support using ATA pass through command

    ▷ Configurable Early-Acknowledge to avoid any data loss during power fail

► Host Interface Connector:

    ▷ USB Series “A”

► Operating System Support:

    ▷ Windows 7/XP/2000/NT/Me/98/98SE, VISTA

    ▷ Mac OS 9.x and above

    ▷ Linux Kernel 2.4 and above

    ▷ Supports Windows Vista and Windows 7 ReadyBoost function

► High Performance Throughput:

    ▷ Typical Read: Up to 100.00 MB/s

    ▷ Typical Write: Up to 25.00 MB/s

► Available Storage Capacities:

    ▷ Type I: 4GB, 8GB, 16GB, 32GB

► Power Consumption (5.0V):

    ▷ Active mode (typical): 180 mA to 500mA

    ▷ Suspend mode (typical): 1 mA

► High reliability and long life:

    ▷ Internal ECC (Error Correcting Code) results in high data reliability (8bits/512 B ECC)

    ▷ Advanced wear leveling algorithm

► Temperature Range: 0° to 70°C (C-Temp) -40°C to 85°C (I-Temp):

► Dimensions: 42.70(L) × 17.00(W) × 7.80(H) mm:

► Flash memory Management:

    ▷ Complete Flash Translation Layer (FTL) for random Flash data access including mapping of logical block addresses (LBA) to physical block addresses (PBA)

    ▷ Bad Block Management

    ▷ Static, Dynamic and Global Wear leveling to maximize write endurance

    ▷ Intelligent garbage collection

    ▷ Read Disturb Management, dynamic data refresh to maximize data retention and refresh data subject to read disturbance

    ▷ Management of sudden power-fails

    ▷ Interleaving, cache, and multi-plane programming

    ▷ Firmware is stored redundantly for recovery and refresh

    ▷ In-Field Firmware update without user data loss

► RoHS Compliant

PRODUCT DESCRIPTION


Unigen’s USB 3.0 flash drives are storage devices that use leading edge technology as the storage media. This ultrahigh speed, rugged, storage media are ideal for consumer products and variety of embedded and industrial applications. Up to 32 GByte cards can be built using a USB series “A” connector.

All UB82HPA USB flash drives are configured as removable devices unless specified otherwise specified by the customer.

► High performance 32-Bit Hyperstone RISC microprocessor.

hyReliability™ Flash Management including superior wear leveling, read disturb management, and power fail management ensuring highest reliability and durability.

hyMap® Flash Translation Layer and mapping offering second to none random write performance, minimal write amplification, and consequently highest endurance for random access heavy usage profiles (e.g. JEDEC Enterprise).

► Flexible 96-Bit/1K BCH ECC engine supporting all Flash Memory requirements.

► Optimized 32-Bit RISC core, instruction set for Flash Memory handling.

► Continuously updated Flash Memory chip support and long term availability.

► AES-128 and AES-256 support with CBC and XTS modes, high performance on-the-fly encryption/decryption.

► Custom features can be implemented with simple firmware upgrades.

► 16 GPIOs for customer specific applications supporting SPI, I2C and ISO7816 or additional flash CE.

► Built-in temperature sensing capability.


Contact Unigen for Datasheets

Phone: 510-896-1818

Email: sales@unigen.com